Continuous Veneer Drying
The moisture content of the veneer dried by the shine veneer dryer is uniform, smooth, without wrinkles or end ripples, without cracks, and the surface is in good glued state.
1.Type: Biomass Veneer Dryer
2.Veneer thickness: 0.8-8mm
3.Heating Area Length: 36m
4.Drying capacity (m³/day) : 55-65
5.Veneer Water Moisture: Fresh veneer to about 0-15%
6.Cost: 6-12$/m3 (Labor+Fuel+Electricity)
7.Heat Source: Biomass Burner (Other options available)
Core Advantage: High Heat Exchange, Low Waste
At the heart of Shine’s dryer is an advanced heat exchange system built for maximum efficiency. Unlike traditional dryers that waste energy on overheating or uneven distribution, this system uses a high-temperature drum to directly contact wet veneers. This direct heat transfer minimizes heat loss, ensuring every bit of energy goes into drying—not escaping. The result? Veneers that dry faster, with uniform moisture content (no dry spots or spongy areas) and flat, wrinkle-free surfaces. No more warping from uneven heat or shrinking that ruins your glue bonds—just pristine veneers ready for your next step.
Smooth, Consistent Quality You Can Trust
Shine’s continuous veneer dryer isn’t just about speed—it’s about quality. Every veneer that comes out of the machine is:
Smooth as glass: No cracks, ripples, or surface defects.
Uniformly moist: Precisely controlled moisture content (no guesswork, no rework).
Ready for gluing: The smooth, flat surface ensures strong, durable bonds in plywood or furniture assembly.
Plus, because the high-temperature drum heats veneers directly, the machine maintains high heat efficiency while keeping energy waste to a minimum. Even better, the selling price of dried veneers (when using this dryer) is often higher than natural-dried alternatives—proof that quality pays off.
Heat Recovery: Save Energy, Cut Costs
Shine’s dryer doesn’t just dry veneers—it recovers energy. Each section is equipped with a dedicated heat exchanger that captures residual heat from the drying process and reuses.
Product Parameters of Continuous Veneer Drying
Model No | GTH30-40 |
Working Width | 3m |
Deck | 2 |
Roller material | Q235B, φ89 steel pipe |
Heating area length | 36m |
Cooling area length | 4m |
Veneer thickness | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/24h) | 55-65cbm |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power:5.5KW（9pc） |
Traction motor | Power: 7.5KW，frequency control（2pc） |
Cold air blower | Power: 5.5KW（1pc） |
Air intake fan | Power : 11KW（2pc） |
4 ton biomass burner | Power: 16.5KW |
Total power | 108.5KW |
Actual electricity consumption | About 76kwh per hour |
Covered Space of the whole machine | 46M X 9M X 3M |
Customer Prduction
Shine Machinery: Drying Veneers with Precision, Care, and Your Success in Mind.
Exhibition
We offer standardized production models that can be tailored to different capacities. Whether you need a compact model for a small shop or a multi-section system for a large factory, we’ll design it to fit your space, budget, and output goals.
Shine Factory
