48 m Veneer Drying Machine
Shine 48 m veneer drying machine has the features of high productivity, energy efficiency, lowest drying cost and perfect drying effect. The composite cost is only about $6-12/cubic meter, which can improve customers profit space greatly.
Veneer Thickness Range: 0.6mm-8mm.
Drying Capacity: around 70 m3 per day.
Roller Material: Q235B, φ102 special shaft tube.
Heat Source: Biomass Burner
Product Introduction of 48 m Veneer Drying Machine
The 48 m veneer drying machine is based on the most advanced continuous pressure contact veneer drying technology in the world.
working principle: is that the veneer is clamped by the upper and lower seamless steel tube rollers, and the oven temperature reaches 140 ℃ by preheating, and then enters between the upper and lower rollers and blows high pressure hot air to the upper and lower sides of the veneer through the hot air pipe for rapid drying.
It can make The veneer after drying has uniform moisture content, flat, and it also has the characteristics of direct contact heat transfer between high temperature roller and wet veneer, high thermal efficiency, low heat loss and reducing heat energy consumption. our drying capacity of 2deck 48 m veneer drying machine can achieve 3m³ per hour.
48 m Veneer Drying Machine in Indonesia Customer Factory
2deck 48 m Veneer Drying Machine of Congo Customer
Veneer dryer Roller running veneer, fan
Advantages of 48 m Veneer Drying Machine
1. The biomass burner,a patented product independently developed by our company, can directly use crushed wood waste as fuel to provide a heat source for the dryer, which is energy-saving and environmentally friendly,and greatly reduces the drying cost.
2. The well-developed heat exchange system fully improves the energy utilization rate and saves unnecessary energy waste.It has obtained the national invention patent.
3. The control cabinet has automatic temperature control and speed regulation system,which can accurately control the final moisture content.Simple operation and low failure rate.
4. The temperature in the burner is 40-60 ℃ higher than that of the traditional dryer (steam, thermal oil),and the temperature is controlled at 140-180 ℃,which shortens the drying time and increases the output.
5. After drying,the veneer is smooth,with no cracks,wrinkles, or end ripples.
6. Shrinkage and hardening are kept to a minimum and veneer collapse and honeycomb structure are avoided.
7. We have a professional R&D team which can design different models according to customer’s special requirement.
8. The perfect after-sale service team can supply 24 hours online service.
Layout Drawing of 48 m Veneer Drying Machine
The Customer Site Video
2 deck veneer dryer video in Congo customer
Product Parameters of 48 m Veneer Drying Machine
Model No | GTH30-48 |
Working Width | 3m |
Deck | 2 |
Heating area length | 44m |
Cooling area length | 4m |
Veneer thickness | 0.6-8mm |
Veneer water moisture | Fresh veneer to about 10% |
Heating material & drying temperature | Waste wood, 140-200℃C adjustable. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/day) | 70-80cbm |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power:5.5KW（11pc） |
Traction motor | Power: 7.5KW，frequency control（2pc） |
Cold air blower | Power: 5.5KW（1pc） |
Air intake fan | Power : 11KW（2pc） |
6 ton biomass burner | Power: 16.5KW |
Total power | 119.5KW |
Actual electricity consumption | About 130kwh per hour |
Project Case
veneer dryer of Zimbabwe
Customer Visiting
Our Certificate
Our Services
1.According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
2.Welcome to visit our factory
3.Inspect the machine before leaving the factory.
4.Oversea install and debug the equipment
5.Train the first-line operator.
6.Provide the VIDEO with Install and debug the equipment
7.Provide technical exchanging
8.Door to door service is possible
The customer evaluation
Product Packaging And Transportation
