Veneer Dryer Suppliers
Type: Roller Veneer Dryer
Working Width: 3m
Veneer thickness: 0.8-8mm
Heating Area Length: 48m
Drying capacity (m³/day) : 150-160
Veneer Water Moisture: Fresh veneer to about 0-15%
Cost: 6-12$/m3 (Labor+Fuel+Electricity)
Heat Source: Biomass Burner (Other options available)
Veneer Dryer Suppliers
Using a veneer dryer for veneer drying can not only make the moisture content of the veneer more uniform, but also make the surface of the veneer dried by the glossy veneer dryer smoother, without warping or end ripples, cracks or fissures. During the drying process of the veneer dryer, the shrinkage rate is kept to a minimum. Therefore, after drying, the veneer is in a very good condition before being used for bonding in plywood manufacturing machines.
Why Choose Shine Machinery?
1. Stable drying quality and reduced wood loss: Shine veneer dryer can ensure uniform moisture content distribution of each veneer by precisely controlling drying temperature, humidity and wind speed, avoiding deformation, cracking (such as warping, end cracking) and other problems caused by local overdrying or overwetting, and reducing scrap rate.
2. Energy saving and consumption reduction, reducing production costs: Modern veneer dryers are mostly equipped with waste heat recovery systems, which can reuse the heat in the exhausted hot and humid air to reduce energy consumption.
3. High degree of automation and convenient operation: Equipped with sensors and touch screen control systems, it can monitor parameters such as veneer moisture content and drying temperature in real time, and automatically adjust the equipment operation status, reduce manual intervention, and reduce the difficulty of operation.
Product Parameters of Veneer Dryer Suppliers
Model No | GTH30-52 |
Working Width | 3.0m |
Deck | 4 |
Roller material | Q235B, φ102 special shaft tube |
Heating area length | 48m |
Cooling area length | 4m |
Veneer thickness and size | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/h) | 6.3-6.7 |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power: 4KW（48pc） |
Traction motor | Power: 5.5KW，frequency control（4pc） |
Cold air blower | Power: 4KW（4pc） |
Air intake fan | Power: 15KW（2pc） |
10 ton biomass burner | Power: 16.5KW |
Total power | 285KW |
Actual electricity consumption | About 200kwh per hour |
Overall Dimension(L*W*H) | 63m×11m×3.5m |
The Factory
In the relentless pursuit of efficiency, environmental protection, and quality in the wood processing industry. Shine Machinery--as a manufacturer of veneer dryers, has become a shining star in the industry with outstanding performance, advanced technology, and intelligent design. We are well aware that the drying process is not only a crucial step in ensuring the stability of the veneer in each process, but also the foundation for improving product quality and extending its service life. That's why Shine has carefully crafted a series of efficient veneer dryers aimed at bringing unprecedented drying experiences to global wood processing companies.
Packaging & Shipping
Another batch of 'efficiency tools' set off!
The veneer dryer sent to Latvia this time is specifically designed to solve problems such as long drying time, high energy consumption, and unstable quality of veneer. Intelligent temperature control and efficient heat exchange shorten the drying cycle, reduce energy consumption, and help improve the quality and efficiency of your production line.
The equipment has passed multiple quality inspections and comes with a quality inspection report. At this moment, it is heading towards the "battlefield" and about to inject new momentum into production.
