Company News
The five vertical veneer dryers purchased by our Myanmar customers have now been installed and running. Our engineers will guide the installation. The output is about 1.2-1.3 cubic meters per hour. They are equipped with built-in furnaces, occupy a small area, and are cheap, requires less labor and
2024/04/08 11:22
The 2 deck veneer dryer purchased by our Thai customer has been installed and will be ready for trial operation in the near future. If you want to see the case site, please contact us!
2024/03/28 10:19
Customer site installation is a 2 deck wood roller dryer, equipped with our biomass burning furnace, can directly burn waste bark, in addition to the customer's own installation of dust removal device, environmental protection problems are basically solved, now has been installed, ready for
2024/03/21 09:01
Shine veneer dryer mainly has the following features:1. The power of the whole machine is reduced by 30%The hot air fan and cold air fan of the veneer dryer adopt new axial flow fans, which not only fully guarantees the air volume required for drying, but also reduces the total installed power,
2024/03/19 11:33
Our Zimbabwean customer purchased a 2 deck 30 m with 4 tons of burning machine is currently in operation, the customer is used to dry pine and eucalyptus 2.45mm thick, the feedback is very good, the later expansion of production capacity will continue to purchase. We are very grateful to our
2024/03/14 09:43
The 2 deck 56 m veneer dryer purchased by our Thai customer is being installed by our engineers. This equipment is equipped with a 10-ton biomass burner, with a width of 3.75 meters. It uses a new axial flow fan to save energy. Save electricity. If you want to see the case site, please contact us !
2024/03/12 14:54
The 2 deck 48 m veneer dryer and 6-ton burner purchased by our customers in Phechabun Province, Thailand, are being installed. Our engineers went to the customer's factory to guide the installation, and the engineers returned only after the equipment could be used normally. The customer used
2024/03/07 09:46
The shine veneer dryer has the characteristics of large drying output, good effect, and easy maintenance. It has been unanimously recognized by customers and has been widely used. However, some customers always report that the efficiency of the wood chip drying equipment is not high. This is due to
2024/03/05 09:46
Many people don't know how to perform maintenance when using the dryer to better extend its service life. Today I will show you the daily maintenance of the veneer dryer.1. Clean the inside and outside of the dryer regularly to ensure good ventilation and smooth hot air flow.2. Check the
2024/02/27 10:10
Faced with rising labor costs, finding highly automated solutions has become a customer demand. Are you also looking for highly automated solutions? Shine's fully automatic intelligent drying production line adopts fully automatic control and frequency conversion control systems. It automatically
2024/02/22 11:06
Pine is considered one of the difficult woods to dry, primarily due to its woody structure and composition.1. Uneven density: The fibers of pine wood are relatively thin and soft, resulting in uneven density within the wood. This causes the wood to dry at an inconsistent rate and is prone to
2024/02/20 11:28
As the Spring Festival approaches, Shine Intelligent Dryer would like to send New Year blessings to everyone in advance and wish everyone a Happy New Year! In the new year, may you be happy and healthy, may everything go well, may you have abundant financial resources, may all your wishes come true
2024/02/02 08:53
