News Center
The 2 deck roller veneer dryer is equipped with a 6-ton biomass burner, which produces more than 70 cubic meters per day. It is being installed in Russia.
2023/12/27 09:13
First: the type of wood to be dried, whether poplar, pine, eucalyptus, or rubber wood.Second: The thickness and size of the dried veneer, such as 1.7 or 2.2 thickness, four-piece or three-piece, etc.Third: What is the moisture content requirement and output after drying, how much water needs to be…
2023/12/19 10:43
The veneer dryer purchased by the South African customer has 4 deck of 50 meters and a width of 4.5 meters. It uses an automatic dialing machine, a semi-automatic dividing board machine and a collecting machine. It is equipped with our 15-ton biomass burner and can directly burn waste trees. It not…
2023/12/15 09:32
Since the veneer dryer is a long and large-scale equipment, the correct order and method should be followed when installing the veneer dryer. The correct installation process is as follows:1. Draw the foundation line: correctly draw the cross lines and elevation lines on the foundation mark plate,…
2023/12/13 10:05
The installation of the 2 deck veneer dryer purchased by another of our customers has been completed! This wood veneer dryer is equipped with our biomass burner, which saves fuel costs and uses new technology to save energy and electricity. Our engineers will go to the customer's factory to guide…
2023/12/07 10:20
The second set of 4 deck veneer dryers ordered by our Latvian customer has been completed and is ready to be shipped. The customer was very satisfied with the first set after purchasing the first set. They expanded production this year and approached us to order another one. Thank you very much for…
2023/12/05 10:23
The recent Russian Woodworking Exhibition is in progress. Our company's Russian agent participated in this exhibition. Our equipment has the advantages of high efficiency, energy saving and low drying cost. With our biomass burner, it can save fuel for you. It can directly burn various Plant waste…
2023/11/30 11:17
The 4 deck 50 m 4.5m wide veneer dryer purchased by our South African customer has been installed. Our technicians went to the customer's factory to guide the installation. The customer is very satisfied with the equipment and looks forward to the official test run!
2023/11/28 10:15
Shine veneer dryers are available with outputs ranging from a dozen cubic meters to more than a hundred cubic meters. They have their own heat source biomass burner; they can directly burn waste bark to save fuel costs (it can also be used with other heat sources). The newly upgraded dryer reduces…
2023/11/23 10:01
This year's World Forestry Conference and World Artificial Panel Industry Expo will be held at the Nanning International Convention and Exhibition Center from November 24th to 26th. We sincerely invite you to attend and visit our exhibition, our booth is Hall D 807-808. At this exhibition, we will…
2023/11/21 10:23
Today, one of our Guangxi customers went to our Guangdong customer factory to visit the actual operation site of the veneer dryer. Our boss led the explanation. This veneer dryer is a four-layer 48-meter-long veneer dryer with a biomass burner. The customer Installing a water film dust removal…
2023/11/16 09:23
The 2 deck veneer dryer ordered by our customer has been produced and is being shipped. Our engineers will go to the site to guide the installation. The engineer will return only after guiding the equipment to operate normally. If you want to see the site, you can contact us in advance. We went to…
2023/11/14 09:47
