0.5 m³/h Veneer Dryer Machine
Shandong Shine's veneer dryer machine is a new generation wood veneer drying equipment.Shandong Shine’s 20m roller venner dryer’s capacity is about 0.5 m³/h -0.7m³/h, and the power consumption is about 50 degrees per hour.
Veneer thickness: 0.6-8mm
Drying capacity (m³/day): 0.5 m³/h -0.7m³/h
Actual electricity consumption: About 50kwh per hour
Product Description of 0.5 m³/h Veneer Dryer Machine
Veneer Dryer Machine has the advantages of high efficiency, energy saving, low drying cost and good drying effect. Our heat exchanger adopts step-by-step heat exchange, the specifications of each section of heat exchanger are different, and the hot air in the heat exchanger can be uniform distributed to the veneer.
Our Services
Pre-sale services:
1) Provide the free consultation of all Core Veneer Dryer Machine
2) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
3) Welcome to visit our factory
Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment
3) Train the first-line operator.
After sale services:
1) 24 hours online service
2) Provide the VIDEO with Install and debug the equipment
3) Provide technical exchanging
4) Door to door service is possible
Main Technical parameter of 0.5 m³/h Veneer Dryer Machine
Model No | GTH30-20 |
Working Width | 3m |
Deck | 1 |
Roller material | Q235B, φ89 steel pipe |
Heating area length | 16m |
Cooling area length | 4m |
Veneer thickness | 0.6-8mm |
Veneer water moisture | Fresh veneer to about 10% |
Drying capacity (m³/day) | 0.5 m³/h -0.7m³/h |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power:7.5KW（4pc） |
Traction motor | Power: 5.5KW，frequency control（1pc） |
Cold air blower | Power:7.5KW（1pc） |
Air intake fan | Power: 11KW（1pc） |
2 ton biomass burner | Power: 15KW |
Total power | 69KW |
Actual electricity consumption | About 50kwh per hour |
Space covered about | 24m×9m×1.6m |
Advantages Of Veneered Panel Dryer
1. The well-developed heat exchange system fully improves the energy utilization rate and saves unnecessary energy waste.
2. The control cabinet has automatic temperature control and speed regulation system, which can accurately control the final moisture content. Simple operation and low failure rate.
3. The Shine veneer dryer directly heats the air, which has a higher temperature than traditional heat sources, and can be stably controlled at 140-180 ℃, maintaining a stable temperature gradient throughout the process to avoid changes in wood properties caused by local overheating.
4. The veneer processed by the Shine's dryer presents a remarkable high-quality state: the surface is as smooth as a mirror, completely avoiding the cracks, wrinkles, and end ripples commonly seen in traditional drying.
5. Shrinkage and hardening are kept to a minimum and veneer collapse and honeycomb structure are avoided.
6. We have a professional R&D team which can design different models according to customer’s special requirement.
7. The perfect after-sale service team can supply 24 hours online service.
Customer case
Brazil 24 meter single-layer roller dryer+2 ton burner customer case site, and the daily output is around 20m ³.
Q&A
1. Can we control the moisture content?
Our products have built-in automatic temperature control and speed regulation system, which can precisely control the final moisture content. Hence, the machine avoids excessive drying of a large number of veneers or the phenomenon that the drying fails to meet the technological requirements.
2. Can the veneer dryer machine be customized according to demand?
Of course we can. We have a professional design team, which can design different models according to the special requirements of customers
3. Can you provide warranty service?
One-year warranty except for electrical components, wearing parts and accessories are provided at preferential prices
