Roller Veneer Dryer For Sale
Shine Machinery’s veneer dryer combines versatility (handling diverse veneer grades), energy efficiency (35% lower power use), and reliability (low failure rate) with impressive output capacity—all at a competitive cost. For manufacturers seeking a dependable, future-proof drying solution, Shine delivers the performance and value that set industry benchmarks. Choose Shine, and experience the difference in your veneer production.
Working Width: 3m
Veneer thickness: 0.8-8mm
Heating Area Length: 24m
Drying capacity (m³/day) : 80-90
Moisture Content: Fresh veneer to about 0-15%
Cost: 6-12$/m3 (Labor+Fuel+Electricity)
Heat Source: Biomass Burner (Other options available)
Roller Veneer Dryer For Sale
The Roller Veneer Dryer Machine stands as a cornerstone of modern woodworking efficiency, combining exceptional drying performance with energy-saving innovation to deliver unmatched value for manufacturers. Designed to handle diverse production demands, this dryer excels in three key areas: high drying capacity, superior energy efficiency, and cost-effectiveness, making it a go-to solution for both small workshops and large-scale industrial lines.
High Drying Capacity: Versatility for Every Veneer Type
The 4-deck roller veneer dryer is engineered to process a wide range of veneer specifications, from thin decorative sheets (e.g., 0.5mm–2mm for furniture) to thicker industrial-grade planks (e.g., 3mm–8mm for construction). Its multi-layer design maximizes throughput by stacking drying zones vertically, allowing simultaneous processing of multiple veneer batches without compromising quality. Whether you’re drying birch, oak, rubberwood, or even small defective veneers (with minor cracks or discolorations that would otherwise be wasted), this machine ensures consistent, uniform drying across all layers.
At the heart of its efficiency lies the 4-deck roller configuration, paired with an advanced automatic feeding system. This integrated feeding mechanism uses precision-engineered conveyor belts to deliver veneers into the dryer at a steady, adjustable rate, eliminating manual loading delays and reducing labor costs. The feeding system’s width and speed are customizable to match your veneer dimensions (e.g., 3m–6m working widths) and production targets, ensuring no material waste and continuous workflow. For high-volume facilities, this translates to daily outputs of up to 300 cubic meters—a critical advantage in meeting tight production deadlines.
Frequency Conversion Control: Precision Drying for Optimal Results
The dryer’s variable frequency control system is its technological backbone, enabling dynamic adjustments to both transmission speed and drying temperature based on real-time conditions. Here’s how it works:
Thickness Adaptation: Thinner veneers (e.g., 0.5mm–1mm) require gentler drying to avoid warping, so the system reduces conveyor speed and lowers temperature (140–160°C). Thicker planks (e.g., 5mm–8mm) need extended heat exposure, prompting the system to increase speed slightly while maintaining higher temperatures (160–180°C).
Moisture Content Regulation: Built-in moisture sensors monitor veneer moisture levels in real time. If a batch has higher initial moisture (e.g., green wood), the system automatically extends drying time by slowing the conveyor and boosting heat output, ensuring no over-drying or residual dampness.
This precision eliminates guesswork, guaranteeing uniform moisture content (8–12% industry standard) and flawless veneer quality with no edge cracking, warping, or surface defects.
Product Parameters of Roller Veneer Dryer
Model No | GTH30-28 |
Working Width | 3.0m |
Deck | 4 |
Roller material | Q235B, φ102 special shaft tube |
Heating area length | 24m |
Cooling area length | 4m |
Veneer thickness and size | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is an automatic temperature control and speed regulation system, which ensures a consistent moisture content. |
Drying capacity (m³/day) | 80-85 |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power: 4KW（24pc） |
Traction motor | Power: 5.5KW，frequency control（4pc） |
Cold air blower | Power: 4KW（4pc） |
Air intake fan | Power: 11KW（1pc） |
10-ton biomass burner | Power: 16.5KW |
Total power | 161.5KW |
Actual electricity consumption | About 114kwh per hour |
Overall Dimension(L*W*H) | 43m×12m×3.5m |
Exhibition and Customer Visiting
In September 2023, Shine's team headed to Jakarta, Indonesia, for the woodworking machinery exhibition, meeting customers over there.
The Factory
As a professional veneer dryer machine manufacturer, Shine Machinery leverages advanced production technology, strict quality control, and extensive industry experience to provide customers with efficient, energy-saving, and durable drying solutions.
Packaging & Shipping
Shipping to Songkala Province, Thailand, for a 2 decks 56m of roller veneer dryer with the Biomass burning system.
