Plywood Veneer Machine
Shine's plywood veneer machine can continuously work 24 hours a day and only needs 4-5 laborers, which greatly saves labor costs. After drying, the moisture content of the veneer is even and smooth. The machine failure rate is low, reducing downtime. The power consumption of the whole machine is 35% lower than that of traditional dryers. Double-layer roller dryer heated by the biomass burner has a very high cost performance, and the comprehensive veneer drying cost is just USD 10 per cubic meter, including the manpower, power, and fuel.
The plywood veneer machine has a variety of different drying configurations to suit a variety of veneer drying needs are available. The length, width, and layers of the core veneer dryer can be designed and made for customers. The veneer roller dryer machine is durable in use and long service life. Shine Machinery is responsible for providing users the best available drying solutions, not just the veneer dryer itself, to ensure higher drying capacity, energy efficiency, and lower fuel cost. In line with the specific production capacity, the wood veneer drying machine can be customized to meet customers' requirements. The heat sources of the roller dryer are all available, not just the traditional steam boiler, thermal oil heater, or natural gas, but also our patented biomass burner. The temperature inside the veneer drying machine is 140-170 degrees Celsius, which is enough heat for the fresh veneer drying.
Technical Specifications of Plywood Veneer Machine
Model No | GTH30-52 |
Working Width | 3m |
Deck | 2 |
Roller material | Q235B, φ89 steel pipe |
Heating area length | 48m |
Cooling area length | 4m |
Veneer thickness | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is an automatic temperature control and speed regulation system, which can guarantee that the moisture content is consistent. |
Drying capacity (m³/24h) | 75-85cbm |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power:5.5KW（12pc） |
Traction motor | Power: 7.5KW，frequency control（2pc） |
Cold air blower | Power:5.5KW（1pc） |
Air intake fan | Power : 15KW（2pc） |
6-ton biomass burner | Power: 16.5KW |
Actual electricity consumption | About 90kwh per hour |
Covered Space of the whole machine | 58M X 9M X 3M |
Project Case
These two photos show two customers' project sites: one in Brazil and the other in Malaysia. One roller dryer is heated by a steam boiler, and the other one is heated by a biomass burner.
Spare parts for the veneer dryer
Along with the veneer dryer parts loaded in the container, we will give some spare parts to customers for free. Please feel free to contact us for the free spare parts list.
The Factory
Shine's factory is located in Gaotang County, Shandong province. Occupying an area of 60 mu, we have all the equipment and tools to produce a roller dryer machine.
Packaging & Shipping
During the container loading, we check all the items and make the loading plan for each container to make sure every single item will not be missing. Take photos of the roller dryer parts in each container and send them to customers to make an inventory when unloading the container.
