Automatic plywood dryer machine
The Shine Roller Veneer Dryer can dry a wide variety of wood types and sizes, including mahogany, fir, pine and more, and can be used by small businesses to large-scale manufacturers to improve product quality and reduce costs and increase profits.
Type: 4 Deck Veneer Dryer
Working Width: 3m
Veneer thickness: 0.8-8mm
Heating Area Length: 48m
Drying capacity (m³/day) : 110-120
Heat Source: Biomass Burner (Other options available)
24 hours online service（WhatsApp：15806625431）
Automatic Plywood Dryer Machine
This four-story 48-meter veneer dryer was ordered by our new customer. Now it has been installed and ready to test. It adopts a new and upgraded new technology. The hot air fan and cold air fan use the latest axial flow fan. Reduced by 35%, more energy-saving and power-saving than the original equipment.
It adopts automatic control and frequency conversion control system, which can automatically adjust the transmission speed and temperature according to different veneer thickness and moisture content, so as to achieve the ideal drying effect, and can precisely control the final moisture content. Avoid the phenomenon that a large number of veneers are over-dried or the drying cannot meet the process requirements.
Heat source: The heat source of this dryer is a biomass burner, which can directly burn all kinds of waste wood, realizing local materials and turning waste into treasure. Significantly reduces energy costs during veneer drying. Of course, it can also be equipped with other heat sources, such as heat transfer oil, natural gas and steam. We will customize the dryer model suitable for you according to your actual situation.
Product Parameters of plywood dryer machine
Model No | GTH30-48 |
Working Width | 3.0m |
Deck | 4 |
Roller material | Q235B, φ102 special shaft tube |
Heating area length | 44m |
Cooling area length | 4m |
Veneer thickness and size | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/h) | 6.5 |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power: 8KW（22pc） |
Traction motor | Power: 7.5KW，frequency control（4pc） |
Cold air blower | Power: 4KW（4pc） |
Air intake fan | Power: 15KW（2pc） |
15 ton biomass burner | Power: 16.5KW |
Total power | 268.5KW |
Actual electricity consumption | About 188kwh per hour |
Overall Dimension(L*W*H) | 57m×11m×4.5m |
Certification
Customer Case
Our Services
Pre-sale services:
1) Provide the free consultation of all veneer production line
2) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
3) Welcome to visit our factory
Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment
3) Train the first-line operator.
After sale services:
1) 24 hours online service
2) Provide the VIDEO with Install and debug the equipment
3) Provide technical exchanging（Technical phone：++8615806625431）Door to door service is possible
Packaging & Shipping
