Continuous Veneer Dryer Machine
Continuous veneer dryer machine can keep the veneer smooth after drying.veneer dryer machine equipped with water circulation system, which can save energy and improve efficiency. Veneer dryer machine is composed of transmission room, drying room, cooling room and other parts. This equipment highlights less investment and cost-effective advantages. We can design veneer dryer according to the needs of customers.
Continuous Veneer Dryer Machine
Shine finished plywood veneer drying machine utilizes the latest international technology of pressurized contact veneer drying, which has the advantages of simple operation, safety and practicality, stable operation, easy maintenance, heat pressing- leveling--drying once completed, etc. The cyclic utilization of hot air has greatly reduced the operating costs of enterprises, improved the quality of sheet materials and increased the production volume.
After the veneer is dried, the veneer is flat and the moisture content is relatively uniform. When the veneer is located between two roller sets, the lateral direction can be freely contracted, the occurrence of cracks is reduced, and the drying quality is good. The heat dissipation process is carried out in a flat state. In the benign physical process of wood shrinkage, the veneers do not warp and deform, the breakage rate is low, and the finished products rate is high. Wood panel veneer dryer of Shine can burn the waste wood directly and other biomass material and save the energy cost greatly for the users.
Product Parameter of Continuous Veneer Dryer Machine
Model No | GTH30-52 |
Working Width | 3.0m |
Deck | 4 |
Roller material | Q235B, φ102 special shaft tube |
Heating area length | 48m |
Cooling area length | 4m |
Veneer thickness and size | 0.6-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/h) | 7-8 |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power: 4KW（48pc） |
Traction motor | Power: 5.5KW，frequency control（4pc） |
Cold air blower | Power: 4KW（4pc） |
Air intake fan | Power: 15KW（2pc） |
10 ton biomass burner | Power: 16.5KW |
Total power | 284.5KW |
Actual electricity consumption | About 200kwh per hour |
Overall Dimension(L*W*H) | 63m×11m×3.5m |
Exhibition and Customer Visiting
Certification
The Factory
Packaging & Shipping
