Veneer Dryer Line

Our veneer dryer has Comprehensive drying cost is low(The combined drying cost is about $6-12 / m3, including labor, fuel and electricity costs.), Adopt axial fan, The power is half the power of traditional dryers.

Type: Roller Veneer Dryer

Working Width: 3m

Veneer thickness: 0.8-8mm

Heating Area Length: 34m

Drying capacity (m³/day) : 120-130Heat Source: Biomass Burner (Other options available)

24 hours online service(WhatsApp:15806625431)

  Contact Now
Product Details

Veneer Dryer Line

veneer roller veneer dryer machine is used to remove Excessive moisture, the fresh core veneers moisture percent is about 60-80%, then we will use dryer machine to dry, then the final moisture percent is about 0-15%. the machine specifciation is not fixed,it need to be customized according to client's requirement. like the moisture of the veneer,the veneer thickness, the veneer size , the capacity per day,these influence the machine specification.

Veneer Dryer Line

Shine veneer dryer provides you with a one-stop solution. The dried veneer has uniform moisture content, is flat, has no wrinkles or end ripples, no cracks, and has a good surface glued state. The power of the whole machine is reduced by 35%, and the power consumption is greatly reduced compared with the traditional veneer dryer.

Veneer Dryer

Working principle of Veneer Dryer

The veneer dryer is driven by the chain to run the upper and lower rollers, relying on the upper roller to press the veneer to run. Biomass combustion furnace is used to burn wood chips, waste wood and other materials at high temperature. Materials boil and fluidize in the burner to provide heat energy to the veneer dryer.For process the surface veneer and long core veneer, this veneer dryer can avoid the break of the veneer, then can raise the veneer utilization ratio and production output. 

veneer dryer machine

Product Parameters of Veneer Dryer Line

Model No


Working Width




Roller material

Q235B, φ102 special shaft tube

Heating area length


Cooling area length


Veneer thickness and size


Veneer water moisture

Fresh veneer to about 8-10%

Heating material & drying temperature

Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent.

Drying capacity (m³/day)


Veneer transport speed

5-22m/min,16A chain

Hot air blower

Power: 8KW(20pc)

Traction motor

Power: 7.5KW,frequency control(4pc)

Cold air blower


Air intake fan

Power: 15KW(2pc)

10 ton biomass burner

Power: 16.5KW

Total power


Actual electricity consumption

About 177kwh per hour

Overall Dimension(L*W*H) 




Our Factory

Our Factory

Customer Visiting

Customer Visiting

Our Services

Pre-sale services:

1) Provide the free consultation of all plywood machinery

2) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.

3) Welcome to visit our factory

Services during the sales:

1) Inspect the machine before leaving the factory.

2) Oversea install and debug the equipment

3) Train the first-line operator.

After sale services:

1) 24 hours online service

2) Provide the VIDEO with Install and debug the equipment

3) Provide technical exchanging(Technical phone:++8615806625431)Door to door service is possible

Send your message to us