26 m Face Veneer Mesh Belt Dryer
Face veneer mesh belt dryer is usually used for the continuous ribbions before cutting.The mesh belt dryer is designed especially for the face veneer at the thickness of 0.2-1.2mm.The equipment is flexible in configuration,and there are many materials for drying at one time,and it can be continuously produced and dried,which is convenient to use and greatly reduces labor.
Product Introduction of 26 m Face Veneer Mesh Belt Dryer
For the thin veneer, the face veneer mesh belt dryer will be more suitable.The mesh belt veneer dryer is used for drying veneers with rotary cutting and slicer and it is designed especially to dry the very thin face veneer typically at 0.2-1.2mm thickness. The drying capacity of 26m 2deck veneer dryer can achieve 1.5-2m³/h. The veneer after drying is flat, moisture content is up to national standard. We can customize the dryer models and design the right dryer for customers according to the specific drying capacity, veneer thickness and moisture content requirement.
26 m Face Veneer Mesh Belt Dryer
Face Veneer Mesh Belt Dryer from all over the world case
Features:
1. This machine is one of the main machines for plywood production.
2. The dryer can effectively and evenly remove the moisture in the veneer to achieve the desired final moisture content.
3. The heating medium can be heat transfer oil or water vapor.
4.The whole machine can be divided into three parts: transmission, heating and cooling.
Video
26 m Face Veneer Mesh Belt Dryer
Product Parameters of Face Veneer Mesh Belt Dryer
Model No | Shine-26 |
Working Width | 3m |
Deck | 2 |
Heating Section | 12 sections×2000mm＝18000mm |
Cooling Section | 1 section×2000mm＝2000mm |
Veneer thickness | 0.2-4mm |
Veneer water moisture | Fresh veneer to about 10% |
Heating material & drying temperature | Waste wood, 140-200℃C adjustable. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity(m³/h) | 1.5-2 |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power:5.5KW（9pc） |
Traction motor | Power: 4KW，frequency control（3pc） |
Cold air blower | Power: 5.5KW（2pc） |
Air intake fan | Power : 11KW（1pc） |
6 ton biomass burner | Power: 18KW |
Total power | 59KW |
Our Factory
We are very welcome to visit the site and our factory
Our Certificate
Our Services
Pre-sale services:
1) Provide the free consultation of all Core Veneer Dryer Machine
2) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
3) Welcome to visit our factory
Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment
3) Train the first-line operator.
After sale services:
1) 24 hours online service
2) Provide the VIDEO with Install and debug the equipment
3) Provide technical exchanging
4) Door to door service is possible
