30 m Veneer Dryer Supplies
The 3 deck 30 m veneer dryer heated by biomass burner has the capacity of 2.5 m3/h. The automatic feeder and veneer collection system are installed to improve the feeding and collecting efficiency and save the labor cost greatl. The 3 deck veneer roller dryer can also run on steam boiler or thermal oil heater.
Product Description of 30 m Veneer Dryer
The 3 deck 30 m veneer dryer has the higher drying capacity compared to the 1 and 2 deck dryer while pricing is more favorable at the same time compared to 4 deck veneer dryer. Shine veneer roller dryer can consistently produce high quality veneer that has uniform dry moisture content, an aesthetic appearance, and is supple enough to minimize damage during the stacking process. Moreover, the veneer is dried in the most cost effective and environmentally friendly manner. This implies using the least amount of thermal energy and producing a minimum of volume dryer exhaust.
veneer dryers machine
3 deck veneer drying machine
Veneer Dryer in Customer's Factory
Main Features and Advantages of 30 m Veneer Dryer
1. The veneer after drying by Shine veneer dryer is smooth and the moisture content is uniform,and the high temperature drum has direct contact with the wet veneer for heat transfer,and the heat efficiency is high,the heat loss is small, and the heat loss is reduced. the selling price for veneer dried by roller veneer dryer is higher than natural drying.
2.The roller veneer drying machine adopts frequency conversion to adjust feed speed according to your veneer thickness and moisture content to achieve ideal drying effect .
3.Shine core veneer dryer or face veneer dryer covers a small area, less ancillary equipment,convenient for transportation,quick installation,and can be put into use quickly and conveniently.
4.Standardized production models,can make different sections or decks according to different capacity requirements,which can meet different customers' requirements.
5.Each section with heat exchanger,which can make full use of the heat and achieve the best drying effect.
6. The fuel source can be the waste wood after peeling or the tree bark,which can reduce the fuel cost greatly for the user.
Video
30 m Veneer Dryer Supplies
Product Parameters of 30 m Veneer Dryer
Model No | GTH30-30 |
Working Width | 3m |
Deck | 2 |
Heating area length | 26m |
Cooling area length | 4m |
Veneer thickness | 0.6-8mm |
Veneer water moisture | Fresh veneer to about 10% |
Heating material & drying temperature | Waste wood, 140-200℃C adjustable. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/day) | 60-70cbm |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power:11KW（11pc） |
Traction motor | Power: 7.5KW，frequency control（2pc） |
Cold air blower | Power: 11KW（1pc） |
Air intake fan | Power : 11KW（2pc） |
6 ton biomass burner | Power: 16.5KW |
Total power | 163.5KW |
Actual electricity consumption | About 110kwh per hour |
Customer Visiting
Customers from all over the world visit
Our Certificate
Our Services
1.According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
2.Welcome to visit our factory.
3.Inspect the machine before leaving the factory.
4.Oversea install and debug the equipment.
5.Train the first-line operator.
6.Provide the VIDEO with Install and debug the equipment.
7.Provide technical exchanging.
8.Door to door service is possible.
