Drying Veneer
The electricity consumption of the shine veneer dryer has been reduced by 35%, and you can visit the case site nearby.
Type: Biomass Veneer Dryer
Working Width: 3m
Veneer thickness: 0.8-8mm
Heating Area Length: 32m
Drying capacity (m³/day) : 110
Heat Source: Biomass Burner (Other options available)
24 hours online service（WhatsApp：15806625431）
Drying Veneer
The veneer dryer machine adopts frequency conversion speed regulation, which can adjust the feed speed according to the veneer thickness and moisture content to achieve the ideal drying effect. Shine biomass roller veneer dryer has the advantages of high efficiency, low fuel consumption and energy saving.
Shine roller veneer dryer has the advantages of simple operation, safety and practicality, stable operation and easy maintenance. The processes of hot pressing-leveling-drying are finished at the same time.The veneer after drying is flat, smooth and without marks and the moisture content is uniform.
Product Parameters of Drying Veneer
Model No | GTH30-36 |
Working Width | 3.0m |
Deck | 4 |
Roller material | Q235B, φ102 special shaft tube |
Heating area length | 32m |
Cooling area length | 4m |
Veneer thickness and size | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/day) | 110 |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power: 4KW（32pc） |
Traction motor | Power: 5.5KW，frequency control（4pc） |
Cold air blower | Power: 4KW（4pc） |
Air intake fan | Power: 15KW（2pc） |
10 ton biomass burner | Power: 16.5KW |
Total power | 212.5KW |
Actual electricity consumption | About 149kwh per hour |
Overall Dimension(L*W*H) | 47m×11m×3.5m |
Customer Case
The Factory
Packaging & Shipping
